Torque Screwdriver Tester-Series 2

The TST combines simplicity with up to date technology to provide a high quality instrument for the testing and calibration of low capacity torque tools.

Featuring an internal transducer complete with Rundown Fixture, the TST is available in 3 torque ranges, 0.04 to 2 N.m, 0.5 to 10 N.m and 1.25 to 25 N.m, and has a Class 1 system accuracy over its Primary range (+/-0.5% of reading from 20 to 100% of full scale). 

What makes the TST genuinely versatile is the interface for an external transducer. This interface, accessed by a 2 way switch in the TST, allows the connection of any transducer from Norbar’s "SMART" range and most mV/V calibrated transducers from Norbar or other manufacturers.

• Pictorial display panel for easy mode selection.
• Limit detection with low, pass and fail indication. Up to 8 target values can be set.
• Operation from battery (included) or a.c. supply (90 to 264 Volts).
• RS-232-C serial data interface for connection to a printer or PC.
• Pulse count feature in Impulse mode and Clutch Tool mode.
• "SMART" intelligence for transducer recognition.

* The TST comes with a rundown fixture these part numbers are for replacement or additional fixtures only